Cardotcom.com - The Dotcom Car Resource
WWW Cardotcom.com
Browse by category:
Browse by make:
Most Popular


Sedo - Buy and Sell Domain Names and Websites project info: cardotcom.com Statistics for project cardotcom.com etracker® web controlling instead of log file analysis

Photo Gallery, Review & Specifications

2005 Ferrari F430

(continued)

Engine

The F430 is powered by a new 90° V8 featuring Ferrari’s traditionally uncompromising design approach with a flat-plane crank (180° between throws). This is an all-new unit that does not share any components with the 360 Modena’s engine. The improvement in terms of performance, weight and reduction of overall dimensions is the result of applying Ferrari’s wealth of F1 experience to its road cars. Despite a 20% increase in engine displacement (from 3586 cc to 4308 cc), engine weight has grown minimally by just 4 kg, while performance is considerably improved across the board. Torque increases by 25% (343 lb-ft at 5250 rpm, 80% of which is already available at 3500 rpm) and power by 23% (490 bhp at 8500 rpm). The engine is extremely compact with a cylinder spacing of just 104 mm. Similarly, Ferrari’s engineers integrated the sump and main bearings in a single casting which, along with a smaller diameter twin-plate clutch and flywheel, has reduced the engine height between the bottom of the oil sump and the crankshaft to just 130 mm (from 145 mm on the 360 Modena power unit).

E-Diff Electronic Differential

One of the technical features that sets the F430 apart is the E-Diff or electronic differential. This solution has been used for years in F1 single-seaters and has been continuously developed and refined, effectively transferring massive torque levels to the track under extremely high cornering g-forces. The E-Diff is now standard equipment on the F430 - the first time that a production car has been equipped with such a sophisticated system for high-performance roadholding. On the track, the E-Diff guarantees maximum grip out of bends, eliminating wheel spin. On the road it is a formidable technological refinement that improves roadholding. This system is available both on the F1-paddle shift version as well as on the manual gearbox model and consists of three main subsystems:

  • a high-pressure hydraulic system, shared with the F1 gearbox (if present);
  • a control system consisting of valve, sensors and electronic control unit;
  • a mechanical unit housed in the left side of the gearbox.

Transmission and F1 Gearbox

The F430 features a new cast-aluminum transmission casing that houses the gearbox in unit with the electronic differential and bevel type final drive, as well as the engine oil tank. The 6-speed gearbox incorporates multicone synchronizers, while both the 6th gear and the final drive have been lengthened to make the most of the greater power and torque of the new engine. The F430 is available with either the classic Ferrari open-gate manual gearbox or with the F1 paddle shift that Ferrari has continuously developed and refined over recent years for its road-going berlinettas. Thanks to that ongoing development, Ferrari’s F1 gearbox for the F430 is state of the art, introducing a number of important modifications: thanks to inputs from the engineers on the Gestione Sportiva racing side, the F1 gearbox management incorporates a new control strategy which further perfects gearchange speed and smoothness under hard use. Changing gear takes just 150 milliseconds, as measured by the ‘hole’ in acceleration during the change (intended as the overall time from declutching, changing gear to releasing the clutch).

Interior

The F430’s interior has been re-designed for improved driver ergonomics. The instruments are housed in a new binnacle, and this design together with the layout of the dashboard underlines the care that has gone into grouping all the major controls in front of the driver within easy reach. In the driver’s direct line of sight are the rev counter, which features new graphics with a choice of either a red or yellow background and a new metal surround, the digital readout of the gear ratio selected (F1 version) and a multi-function display. The same uncompromising approach to driver control was the inspiration behind mounting the starter button and manettino on the steering wheel. The wheel itself is new with the upper rim flattened to improve visibility in the straight ahead position, and the horn pushes are integrated into the inner rim where they can be easily actioned. The interior reflects the advanced technology and materials employed in the car’s construction, and can be personalized with carbon-fiber or aluminum inserts. The cockpit is noticeably bigger and the already excellent passenger comfort is subsequently increased thanks to a slimmer central tunnel which houses the gear lever turret on the manual version and the F1 console on the paddle-shift version. There is plenty of space behind the rear seats, with a new electrically operated compartment for oddments storage and catch netting to the rear fire wall. The seats have been redesigned for greater lateral containment and the standard electric seats can be substituted by more sporting items with four-point harnesses to order (depending on markets).

<< Ferrari F430: Page 1

Other Ferrari Cars
Top Top Email this page Email this page
Newsletter
Subscribe
Unsubscribe
 
More information

Cardotcom.com RSS feed

Home | List of Cars | News | Modifications | Miscellaneous | Multimedia | Most Popular | Links